龙8老虎机pt,龙8国际pt官方网站: iCEcube2 Design Software

Ultra-productive design tools for ultra-low density devices.

龙8老虎机pt,龙8国际pt官方网站,何为儒家?蔡仁厚先生的老师、新儒学第二代代表人物牟宗三先生对此有过界定。墨尘却突然像个小姑娘似的扭捏起来:“那个,红莲姑娘,在下自己来便是。第三章评审程序第九条奖学金评选办法及程序(一)奖学金每年评选一次,由符合条件的学生本人提出申请,填写奖学金申请表,经所在单位评审、推荐,分别上报学校学工部和研工部;(二)学工部和研工部按照公平、公开、公正及择优的原则对申报材料进行审定,将审定后名单及材料报送学校评审委员会进行评审、审核,经评审委员会评审、审核后在全校范围内进行公示,公示期为3个工作日;(三)申请学生对本奖学金评选结果有异议者,可在公示期内向评审委员会办公室提起申诉,评审委员会办公室对申诉内容进行核实并征求各方面意见,经综合审查后做出处理意见,报评审委员会批准后,通知异议者本人。张德江强调,深入开展宪法宣传教育,大力弘扬宪法精神,目的是为了牢固树立宪法法律权威,推动全面贯彻实施宪法。

屈伟说到,对于学医的人,这是一个最好的时代,它为我们提供了很好的平台,希望同学们学好专业,打好基础,找到行业需要解决的痛点,看到现象背后的机会。9月10日,黎小敏在女子撑杆跳比赛中,以米的成绩勇夺第一。学科办、人事处、教务处、研究生部、科研处、艺术实践处、外事处、计财处、后基处主要负责人参加会议。2016年,中国青年网校园通讯社大学生通讯员原创稿件超出10万篇,刊发1700余篇,经网络投票、作品审查、年度考核等环节,最终获奖优秀原创奖70篇,其中我校张小东和赵凯旋的《湖北医药学院学子走进职业病患者:疾病缠身微笑面对》与官昕、龚雪晨的《大学生返乡创业互联网+三农带动300余户村民脱贫》获得2016年度优秀原创稿件奖。

他们正在老去,甚至有天可能会忘了自己,却永远不会忘记爱你。”步骤完整的教学示范是学生有效学习的重要手段。学校有权对参赛作品实施资源共享。(编辑郑建超)上一条:下一条:

龙8老虎机pt,龙8国际pt官方网站

Maximize performance, minimize utilization – iCEcube2 is optimized for extracting more from your ultra-low density FPGA design. Which means you get even more for less.

Simple, intuitive and easy – iCEcube2 offers a streamlined design flow for ease of use.

World class simulation and synthesis – iCEcube2 software integrates industry leading simulation and synthesis tools.

Jump to

Overview

More and more designers are turning to ultra-low density FPGAs like the Lattice iCE40 for low cost, low power applications, particularly for mobile and consumer products. These FPGAs pose their own unique design challenges, and you need customized, easy to use design tools to hit cost, power, and time to market targets. Welcome to the productive world of iCEcube2 design software.

Optimize your Ultra-low Density FPGA for Power and Cost

  • iCEcube2 tools are a custom fit for ultra-low density design
  • Create projects tailored for specific tasks
  • Assign design files and constraints to front-end or back-end processes

Tools that Work the Way You Work

  • Simplified design flow for improved ease of use
  • Simple design process steps
  • GUI feedback for completed tasks
  • Standard GUI actions for intuitive functions

Design Simulation…Design Synthesis…Design Done

  • Leverage industry-leading simulation and synthesis technologies
  • Use synthesis inferencing for functions instead of using pre-defined modules
  • Use existing constraint entry capability in synthesis
  • Use existing schematic display capability in synthesis
  • Use standard HDL simulators for verification

One Design Flow, All the Tools

  • A complete design environment
  • Project management
  • Constraint editor
  • Floorplanner
  • Package view
  • Power estimator
  • Static timing analyzer
  • Synthesis
  • Simulation
  • Device programming

Versions

iCEcube2 Version 2017.08

  • This version of the iCEcube2 software adds support for the device-package combinations:
    • iCE40HX4K - BG121
    • iCE40HX8K - BG121
  • Fixed bug for incorrect options to bit generation provided by the Tcl script.
  • Fixed bug for incorrect result from PLL module generator in RHEL 7.2.

iCEcube2 Version 2017.01

  • Added VPP_2V5_TO_1P8V synthesis feature for iCE40 Ultra and iCE40 UltraPlus devices.
  • Enhanced auto assign SPI dedicate pin if no SPI instance.
  • Fixed bug for RGB LED driver pin mapping issue in iCE40 UltraPlus device.
  • Fixed bug for I3C simulation model for iCE40 UltraPlus device.

iCEcube2 Version 2016-12

  • Removed the license control for iCE40UP5K – UWG30, iCE40UP3K – UWG30 and iCE40UP5K – SG48

iCEcube2 Version 2016.08

  • This version of the iCEcube2 software adds support for the device-package combinations:
    • iCE40UP5K-UWG30
    • iCE40UP3K-UWG30
    • iCE40UP5K-SG48
  • Enhanced Pin Constraint Editor with pullup/weakpullup constraints process.
  • Added support for Windows 10 OS, 32-bit and 64-bit.
  • Added Pack Area option to placer tool options.
  • Added VPP_2V5_TO_1P8V synthesis feature for ICE40 UltraLite devices

iCEcube2 Version 2016-02

  • Fixed bug on iCE40 and iCE40LM in RAM cascade mode
  • Enhanced the placer report for the registers that are packed into I/O. GUI also shows them correctly after place and route

iCEcube2 Version 2015-08

  • Support for Windows 8 and 8.1

iCEcube2 Version 2015-04

  • iCE40UL family – Now generally available.
  • iCE40 Ultra (iCE5LP) family
    • Added 48 QFN package (package name is SG48).
    • Added CM36 package (package name is CM36)

iCEcube2 Version 2014-12

  • iCE40 Ultra (iCE5LP) family
    • DSP signed accumulator and signed multaddsub instantiation. Refer to Technology Guide for the list of supported SB_MAC16 configurations
    • SB_MAC16 inference for Synplify Pro (in addition to existing LSE support)
    • Support for PLL reconfiguration during runtime
  • Programming
    • For some time, the Diamond Programmer is the tool to use to program iCE devices. The obsolete iCEcube2 programmer has now been removed from iCEcube2 installation to avoid confusion.
  • Synopsys SynplifyPro Synthesis update: to version J-2014.09L

iCEcube2 Version 2014-08

  • iCE40 Ultra (iCE5) family full support – note: single package (the SWG30 and UWG20 are not available)
    • Available device and package combinations:
      • iCE5LP4K – SWG36
      • iCE5LP2K – SWG36
      • iCE5LP1K – SWG36
    • DSP Block SB_MAC16 support:
      • Inference support - LSE only
      • 50 pre-defined SB_MAC16 functional configurations. Please refer to Technology Guide for supported configurations
    • Module generation for SPI/I2C (Verilog only)
    • Power Estimator support
    • Implementation of RGB using soft logic instead of SB_LEDD_IP hard block. Now use SB_RGB_IP primitive. Previous designs that use SB_LEDD_IP must be migrated to SB_RGB_IP for this release.

iCEcube2 Version 2014-04

  • Fixed routing to dedicated pins support for SPI & I2C Hard IP primitives in iCE40LM devices.
  • More accurate power estimation support for iCE40LP1K, iCE40HX1K, iCE40LP4K, iCE40HX4K, iCE40LP8K, iCE40HX8K and iCE40LP384.

iCEcube2 Version 2013-12

  • This version of the iCEcube2 software provides complete access to the iCE40LM device family.
  • The iCE40LM family has the following additions in this release:
    • iCE40LM1K – 1K density device
    • CM36 and CM49 package — for all three of the device densities: 1K, 2K, 4K
  • Includes a Module Generator to enable simple, correct design entry of the I2C and SPI blocks for the iCE40LM family.
  • Updated power estimation support for iCE40HX (add density) and iCE40LP (4K & 8K) devices
  • Note: If using Diamond 3.0 Programmer to program an iCE40LM device, you must have the following control string in your license file: LSC_CTL_ICE40LMnK, where “n” is the target device density. For example, iCE40LM2K requires the string: LSC_CTL_ICE40LM2K. Email 龙8老虎机pt,龙8国际pt官方网站lic_admn@ 龙8老虎机pt,龙8国际pt官方网站 www.texhomamotorplex.com to have this added to your license file.

iCEcube2 Version 2013-08

  • This version of the iCEcube2 software adds support for the following device-package combinations. Some of these require a special license from Lattice to be available:
    • iCE40LP1K-SWG16TR
    • iCE40LP640-SWG16TR
    • iCE40LM4K-SWG25TR,UMG225 (special license required)
    • iCE40LM2K-SWG25TR (special license required)
  • iCE40LP384-CM81 Package support is no longer available.
  • Synplify synthesis flow requires additional license “LSC_ICECUBE2_EDIFIMPORT’.
  • IP Reference designs are removed from iCEcube2 installation. Refer “IP Reference Designs” section for more details.
  • More accurate timing for ICE40 LP and HX devices.

iCEcube2 Version 2013-03

  • The iCEcube2 software contains two synthesis tools.
    • Lattice Synthesis Engine (LSE).
    • Synopsys Synplify Pro.
  • LSE is the default synthesis tool in iCEcube2 flow.
  • This version contains memory initializer command line utility to initialization the BRAM memory contents at post place and route stage.
  • More accurate timing for iCE40–LA devices.

iCEcube2 Version 2012-09 SP1

  • Improved static power estimation.
  • Operating condition is changed to include wider temperature ranges for commercial and industrial settings.
  • Improved placement support to place LUTs in the external feedback path of PLL at optimal location.
  • More accurate timing for iCE40–LA devices.

Licensing

iCECube2 Software Free License

To request a license you will need the following:

  • Lattice website user account
  • Physical MAC address (12-digit hexadecimal value)

Click here to request your license.

Software Downloads & Documentation

Quick Reference
Information Resources
Downloads
TITLE NUMBER VERSION DATE FORMAT SIZE
iCEcube2 and Modelsim
AN006 1.6 10/26/2015 PDF 1.7 MB
iCEcube2 Timing Constraints
1.0 6/1/2010 PDF 863.6 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
iCEcube2 2017-08 Install Overview
2017-08 10/10/2017 PDF 980.9 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
iCE 2017-08 Technology Library
2017-08 10/10/2017 PDF 2.7 MB
TITLE NUMBER VERSION DATE FORMAT SIZE
龙8老虎机pt,龙8国际pt官方网站 iCEcube2 2017-08 User Guide
2017-08 10/10/2017 PDF 10.3 MB
TITLE NUMBER VERSION DATE FORMAT SIZE
iCEcube2 Brief
1.0 4/20/2012 PDF 937.6 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
iCEcube2 2017-08 Release Notes
1.0 10/10/2017 PDF 568.9 KB
TITLE NUMBER VERSION DATE FORMAT SIZE
iCEcube2 2017-08 Tutorial
2017-08 10/10/2017 PDF 2.3 MB
TITLE NUMBER VERSION DATE FORMAT SIZE
iCEcube2 2017-08 for Linux
2017-08 10/10/2017 361.1 MB
iCEcube2 2017-08 for Windows
2017-08 10/10/2017 727.8 MB